Diving Rebreathers What to Know Before You Dive

A major benefit of rebreathers is longer dives because a portion of the gas supply is reused, than when using open circuit scuba tanks.

Rebreathers are great for photography because they don’t frighten fish with exhaust sounds. And, they deliver warm, moist breathing gas and a more optimum gas mixture for divers on extended and deeper dives.

There are three basic types of rebreathers: oxygen rebreather, semi-closed rebreather, and closed-circuit rebreather (CCR). Some experts and manufactures differentiate the types into two or four. Halcyon, a dive equipment manufacture, lists oxygen, active addition, semi-closed passive addition and fully closed. ( http://www.halcyon.net/en/gear-up/rebreathers/rebreather-types)

The difference in the method rebreathers operate is the manner in which they add gas to the breathing loop, and control the concentration of oxygen in the breathing gas.

Generally, the breathing loop includes a carbon dioxide (CO2) absorbent canister, a way to add fresh oxygen needed by the diver, and a design to ensuring that gas circulates in one direction. A single fill of a small gas cylinder or cylinders and CO2 scrubber can last, depending on the model, from one to six hours; and, gas duration on a rebreather is nearly independent of depth allowing a diver to spend more time at the deepest portion of a dive.

In 1943, Jacques Cousteau and his partner Emilie Gagnan co-invented a demand valve system that supplies divers with compressed air when they breathe. It turns out, however, that rebreathers have been around longer than better known open circuit scuba gear. Englands Henry A. Fleuss submitted a patent in 1878 and the rebreather was used two years later to close some crucial valves in the Severn River.

Read more here Source: Rebreathers